See it Work LitterMaid™

(Video requires the
Windows Media Player)

	The cat enters the unit; once he/she leaves, the Sensors are triggered, setting the timer for the cleaning cycle. The Sensors need to be completely blocked for at least 5 seconds. (Cat leaving unit - 1)
	After 10 -12 minutes, the cleaning cycle starts and the Rake moves waste clumps into the Waste Receptacle.
	The Rake opens the Waste Receptacle Compartment Cover and deposits the clumps into the Waste Receptacle before closing the cover and returning to the Home position.
	The sealed disposable Waste Receptacle allows for safe and easy disposal of waste when full. To remove, just depress the two push tabs in the Waste Receptacle Compartment Cover (detaching the Waste Receptacle Lid from the Waste Receptacle Compartment Cover). Lift the compartment Cover exposing the closed Disposable Waste Receptacle assembly. Press in on all four corners of the Lid to secure the Lid to the Waste Receptacle. Pull the disposable Waste Receptacle edge free from the tabs holding it in place, and lift out and dispose.

Important:

The Littermaid will not start a cleaning cycle while the cat is in the unit.

Also, if the cat re-enters and leaves the LitterMaid before the initial 10-12 minutes have elapsed, the timer will automatically reset and delay the beginning of the cleaning cycle for an additional 10-12 minutes.

Note: The Rake will stop and reverse if the Safety Bar touches any object that has gotten behind the Rake while it is returning to its Home position.

PRODUCTS & SHIPPING \| TERMS AND CONDITIONS \| PRIVACY POLICIES		All contents Copyright ©2007 Applica Consumer Products, Inc.
Web Site Design & Development by: L&P Media